Shower Upgrade 101 - Top Tips For New Unit Installation

Give Me A Quote!

We have encountered this great article about Simple ways to Install a Shower Cubicle on Your Own down the page on the internet and decided it made sense to relate it with you in this article.

An effective shower installation needs mindful planning and also a lot of work. In most cases, you will require to do three types of tasks: mounting wall surfaces, setting up the plumbing, and completing wall surfaces.

Preparation

First of all, you must choose the sort of shower that you wish to set up. It is important to determine whether the selected shower can dealing with specific systems and also can regulate a risk-free degree of water via the boiler. Many shower systems nowadays are created to be versatile to various water stress (such as stored hot water as well as cool keys).
It is also essential to take into consideration the water stress and also the preparation of the piping and also drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The pipe and also spray parts of the push-on mixer shower device can be connected to the bath tap based on your requirement, and the water temperature can be adjusted via the faucets. Push-on mixers are cheap and also exceptionally straightforward to mount. Nonetheless, although the tube connection is simple, it is conveniently displaced. In addition, it is bothersome to readjust the temperature level.

Bath/Shower Mixer: The pipe as well as spray of this type of shower are combined with a bath mixer faucet, and also the temperature level can be changed through the bath faucets. It is a really inexpensive option and also no additional plumbing is included. However, the bath/shower mixers also deal with bothersome temperature level control choices.

Manual Mixer: The tube and also spray of a hands-on mixer shower unit belong of the wall surface system and the cold and hot water materials are connected to a single valve The temperature and also stress of the water are managed with either one or a variety of knobs (in extra pricey showers). Although temperature control is a lot easier in hand-operated mixer types, they are more costly than the previously stated mixers. They also call for additional plumbing of cold and hot supply of water pipelines.

Thermostatic Mixer: The hose pipe and spray of this shower kind are a part of the wall surface unit and also the hot and cold water supplies are linked to a single shutoff here also. It is complete with an integrated stabiliser to self-adjust the water temperature and to stop it from coming to be too warm. Among the largest advantages of a thermostatic mixer shower kind consists of convenient temperature level control. Nevertheless, it is the most pricey of the different mixer options.

Power Shower: A power shower is a solitary unit having an effective electric pump that can altering both the water stress as well as temperature level. This kind of shower can be fitted if there is water supply from a cold water tank and a warm water cylinder. A power shower makes the change of both pressure and also temperature very easy. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is provided by a combination central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and it warms the water electrically. It is essential to keep in mind that for this shower type to be mounted, the mains stress needs to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The device enables the temperature level as well as stress to be changed using a knob. Versions with temperature stabilisers are much better as they stay untouched by various other taps in other places in use within the family. A significant disadvantage of electrical showers is that the control knob just permits the choice of heats at less pressure, or reduced temperatures at a higher stress. This is troublesome in the winter when the spray is frequently weak and also the mains water is chillier. Nevertheless, this trouble is tackled in some designs which are readily available with a winter/summer setting.

Technique

Relying on the sort of shower you want to mount, the shower head have to either be suited order to avoid its contact with the water in the bath listed below or the base tray, or it has to have a check valve.
Before beginning, it is suggested to note the positions of the shower head as well as control, as well as to plan the pipe-work entailed. In addition, the drainage system to remove the waste water will certainly require to be intended. Both settings of the cord path as well as the shower button will likewise need to be thought about if an immediate or electric shower unit is being installed.
Use the instruction overview given with the shower system to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is essential to cut off the water. In order to shield the pipelines, they ought to be given a waterproof covering and also fitted with separating shutoffs. The pipelines can then be buried into the wall surface and also smudged over to neaten the general look.
Fit the base tray, shower head, and fittings.
Attach the primary shower control to the pipes that will be providing the water (This may call for a female screw string adapter).
Reconnect the supply of water and also test the pipelines for any leaks, as some might need firm.
If you are setting up an electric shower, remember to turn off the electrical energy supply before making any electric connections. When these connections have actually been made (there must be assistance within the instruction manual), the power supply can be switched over back on.

Changing Water Pressure to Match Your Shower

The cold water tank can be raised to a higher height (sometimes as low as 150mm (6inches)) by fitting a solid wooden assistance below it - perhaps composed of struts as well as blockboards. If you pick this choice, the major and circulation pipes will additionally have to be elevated to meet the brand-new height of the tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it should be attached into the power supply in order to run.

Piping and Drain

It is best to make use of 15mm diameter supply pipelines, as well as make the go to the shower as brief and also straight as possible so regarding keep maximum stress and minimise warm loss. In addition, by minimising using joints for pipeline corners, you can reduce the resistance in the circulation of the supply of water. You can accomplish this by flexing the pipes instead.

A Lot Of Usual Blunders

Breaking or disregarding local code restrictions.

Using pipelines that are also tiny.

Affixing copper to galvanized without making use of a brass or dielectric suitable between the two.

Not utilizing tape or pipe compound at threaded joints.

Uneven your fixtures when mounting them.

Not setting up an air gap filling up for components.

Cutting supply stub outs too brief to mount the shutoff valves onto after the finished wall remains in area.

Not properly aligning tubing right into installations or quit shutoffs. (Forcing the nut onto the compression ring at an angle when the tubing is at an angle will trigger a leakage.).

When transforming the water back on in your house, constantly run the outside hose pipe valve or flush your bathrooms to bleed dirt as well as air from the lines. This particles can trigger issues in your sink taps and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you appreciate reading about How to Build a Shower Enclosure for Your DIY Bathroom? Post feedback below. We would be interested to listen to your insights about this blog entry. In hopes that you visit us again in the future. So long as you enjoyed our article please don't forget to pass it around. Thanks so much for taking the time to read it.

Schedule An Appointment